PEX Repiping and Slab Leaks Cost Livermore, CA

A repipe is the procedure where the existing piping in your home or a building are replaced with brand new ones. All pipe fittings, supply lines and water valves are changed. this usually results in greater water pressure and healthier quality water.

Should I Repipe the house in Livermore, CA?

There are many reasons for why you may want to upgrade the pipes of the home.

For properties with galvanized water line:

Galvanized water pipes are located in homes constructed during the 80’s. A galvanized pipe is an iron water pipe which is zinc coated to be protected from corrosion. However the zinc coating slowly corrodes over the years exposing the iron, then oxidation buildup.

Usual Slab Leak Symptoms:

Lower Water Pressure – The reason why may be the restriction of the water flow attributed to rust and corrosion build-up inside of the galvanized water pipe.

Rusty Water – Rust normally goes into the fixtures. This suggests a high level stage of corrosion in your pipes.

Leaky Pipes – Leaks are most frequently the result of corrosion of the galvanized iron pipes. Obscured leaks may develop in the walls, inside of the attic and under the house, building up the potential for serious damage to your home.

For homes with polybutylene water pipe:

This kind of plastic water pipe was used from the middle of the 70’s to the early 90’s. At the time it was perceived as the next great plumbing improvement for plumbing and fixtures. Polybutylene water line systems had been installed in millions of homes prior to being discovered to be highly flawed. About 60% of all properties constructed during this time frame is still equipped with this category of pipe in the house.

Polybutylene water pipes have an exceptionally brief lifespan, since harsh chemicals in typical city-provided water makes it solidify and turn into brittle. The fittings generally start leaking first, followed by the water line itself.

Polybutylene water pipes are made up of flexible plastic pipe, gray when used inside and black or blue outside. Certain fittings are made with plastic and metal. Insert fittings are used to join up sections of polybutylene pipe.

For houses with copper plumbing situated in the slab.

Slab leaks are generated by copper or any other piping becoming corroded from certain water and soil conditions under the floor of the house.

Symptoms of a Slab Leak:

  • Water leaking through the foundation.
  • Water is running even when the faucets are turned off.
  • Your water meter shows the water is running whether or not your water is off.
  • Very higher water costs.
  • Neighbors have already experienced a slab leak.
  • You have experienced a previous slab leak.

Advantages of Copper Repiping

  • Substantial water pressure
  • No more rust color or smelly water
  • Clean, crystal-clear water
  • The ability to use more than one faucet at the same time
  • High quality plumbing with no more leaky water lines.
  • No skin scalding in the shower when someone turns on your faucet or flushes.
  • Greater relief since your piping system is protected.
  • Beneficial selling feature for your property.

When you hire a local plumber or other business to complete the task, it’s quite possibly going to cost you more in the long run when you consider that you’ll have to hire a drywall repair service provider to patch over the many repair points. Whenever you employ the service of a repipe business which includes a master patcher on staff such as Repipe Specialists, you’ll never have to pay out extra money or time in getting your household back to normal. From start to finish, the PEX and Copper repiping procedure usually takes only 2 or 3 days.